home *** CD-ROM | disk | FTP | other *** search
/ The Original Shareware 1.1 / The Original Shareware (WeMake CDs)(Volume 1.1)(CDs, Inc)(1993).iso / 7 / telenet.zip / HOW-TO < prev    next >
Text File  |  1986-07-11  |  4KB  |  106 lines
  1.  
  2.                        How To Use PC Pursuit Service
  3.                        -----------------------------
  4.  
  5.     Placing a PC Pursuit Call
  6.     -------------------------
  7.  
  8.       * Use a modem to dial your local Telenet access telephone
  9.         number with parameters settings of 7-E-1. You can switch
  10.         later to 8-N-1 after step 5 for file transfers (see ACCESS
  11.         File to obtain your access number).
  12.  
  13.       * Type two CARRIAGE RETURNS (CR) (CR)
  14.  
  15.  
  16.       Telenet  Prompt      User Input              Comments
  17.       ======================================================================
  18.  
  19. (1)   Terminal =        D1 (CR)                    Input Terminal ID.
  20.                                                    D1 is typical for
  21.                                                    PC's. If not known,
  22.                                                    type CR.
  23.  
  24. (2)   @                 C DIAL212/12,YOUR ID (CR)  Type area code desired,
  25.                                                    modem speed and your
  26.                                                    user ID. (Note that
  27.                                                    /3 = 300 bps, and /12 =
  28.                                                    1200 bps).
  29.  
  30. (3)   PASSWORD =        PASSWORD (CR)              Enter user Password
  31.  
  32. (4)   DIAL 212/12                                  Connected to target
  33.       CONNECTED                                    city outdial modem.
  34.  
  35. (5)                     ATZ                        Type ATZ (in upper case)
  36.  
  37. (6)   OK                                           Modem responds as cleared.
  38.  
  39. (7)                     ATDT 7654321               Type ATDT (in upper case)
  40.                                                    and the 7-digit number
  41.                                                    you wish to dial.
  42.  
  43. (8)   CONNECT           (CR) (CR)                  You are now connected to
  44.                                                    the computer that you
  45.                                                    dialed. Procees as if
  46.                                                    the  number was dialed
  47.                                                    directly.
  48.  
  49.  
  50.     NOTES:
  51.     -----
  52.  
  53.     1. If the connection was not made, a BUSY will be seen within 30
  54.        seconds. The BUSY message means that the number dialed was either
  55.        busy, not in service, or an invalid attempt to dial more than 7
  56.        digits. A BUSY will also be seen after disconnecting from the
  57.        host computer, but you can dial another number by starting again
  58.        at the fifth step and typing ATZ and dialing the number.
  59.  
  60.     2. PC Pursuit uses standard HAYES dialing commands, which enable
  61.        you to type the A/ (no CR) command to redial the previously
  62.        dialed number.
  63.  
  64.     3. When a typing mistake is made in the second and third steps,
  65.        the log-on must be re-entered.
  66.  
  67.  
  68.     To Disconnect from PC Pursuit
  69.     -----------------------------
  70.  
  71.       Telenet Prompt      User Input               Comments
  72.       ======================================================================
  73.  
  74.                           (CR) @ (CR)              Escape to Telenet
  75.                                                    command level.
  76.  
  77.       @                   D (CR)                   At the @ sign,issue
  78.                                                    disconnect command.
  79.  
  80.       DIAL212/12                                   Disconnect from the
  81.       DISCONNECTED                                 target city complete.
  82.                                                    User is still connected
  83.                                                    to Telenet at the local
  84.                                                    dial-up city. A PC Pursuit
  85.                                                    can now be placed to
  86.                                                    another city.
  87.  
  88.  
  89.     NOTES:
  90.     ------
  91.  
  92.     1. To DISCONNECT FROM TELENET, log off your computer as usual, or
  93.        hang-up.
  94.  
  95.  
  96.  
  97.  
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.  
  106.